Precision equipment, specced to your line
A sample of what we supply and stand behind — every unit quoted with a real price and an honest lead time.
Part finder & cross-reference
Search by our SKU, an OEM part number, or plain description. If you only have the worn part, photograph the nameplate and email it to us.
PARTS in the page source with real SKUs, prices and stock before launch.What we supply
Equipment and consumables for plating, anodizing, passivation and finishing lines — sized to your chemistry, throughput and footprint.
Plating & Process Tanks
Polypropylene, PVC, CPVC, PVDF and lined steel. Rectangular, cylindrical and multi-station lines with integral drains, weirs and containment.
View tanks & hardware →Filtration Systems
Chamber and cartridge filters, pump-filter combos, carbon treatment and polishing loops sized to bath volume and turnover rate.
View filtration systems →Pumps & Circulation
Magnetic-drive, seal-less vertical and centrifugal pumps in chemistry-compatible polypro, PVDF and Kynar wetted paths.
View pumps & dosing →Heating & Cooling
Immersion heaters in titanium, quartz and fluoropolymer, plus heat exchangers, chillers and PID temperature control.
View heating & cooling →Rectifiers & Controls
DC power supplies, pulse and periodic-reverse rectifiers, PLC panels, dosing control and line automation.
View rectifiers & controls →Agitation & Ventilation
Air sparge, eductor and cathode-rod agitation; lip and push-pull exhaust, fume scrubbers and mist eliminators.
View agitation & ventilation →Why buy from BAT
Service first, straight answers always — process equipment, without the runaround.
Expert support
Email us and a person who knows plating answers — with a part, a price and a lead time. No callback queue, no "request a quote" black hole.
Send a part number
Give us the OEM number or a photo of the old part. We match it to a compatible equivalent — no spec sheet needed.
Competitive pricing
Published numbers priced against the quote-only incumbents. No negotiating to reach list price, no games.
Up front and transparent
We quote the real lead time up front — stocked, days, or weeks — and keep you posted until it lands. Guided by signal, not guesswork.
Line card
What we carry. Every quote comes with a real lead time — consumables turn fastest, engineered assemblies take longer, and we tell you which is which up front.
| Category | What we stock | Availability |
|---|---|---|
| Process Tanks | Plating, cleaning, rinse, passivation and anodizing tanks; multi-station lines, containment, covers and lids | Days to weeks |
| Filtration | Chamber filters, pump-filter units, carbon treatment, polishing loops, replacement media | Fast turn |
| Pumps & Vacuum | Magnetic-drive, seal-less vertical, centrifugal and transfer pumps; vacuum systems | Days |
| Heating & Cooling | Immersion heaters, heat exchangers, chillers, PID controllers and over-temp protection | Fast turn |
| Motors & Drives | Motors, gearmotors, VFDs and hoist drives for barrel, rack and transfer systems | Days |
| Rectifiers | DC power supplies, pulse and periodic-reverse rectifiers, bus bar and cabling | Weeks |
| Agitation | Air sparge headers, eductors, cathode rod agitation, blowers and low-pressure air | Fast turn |
| Ventilation | Lip and push-pull exhaust, fume scrubbers, mist eliminators, ducting and fans | Days to weeks |
| Automation | PLC control panels, hoist and transfer automation, dosing, monitoring and data logging | Weeks — engineered |
| Consumables | Cartridges, bags, carbon, anode bags, gaskets, seals, liners, heater elements | Fast turn |
Every quote comes with the exact lead time for your item — if it's a ten-week build, we say ten weeks before you order, not after.
Industries served
Finishing · Plating · AdditiveCommon questions
Ordering · Compatibility · TermsDo you actually stock in the USA?
We are based in Atlanta, Georgia and ship stocked items from here. Not everything is on our shelf — engineered assemblies and some equipment are built or sourced through our supplier network. The difference is we tell you which is which, with a real lead time, before you order.
Will an aftermarket part void my equipment warranty?
In the United States, the Magnuson-Moss Warranty Act generally prevents a manufacturer from voiding a warranty simply because you used a third-party consumable. A manufacturer can deny a claim if it shows the part caused the failure. We supply parts built to the original specification, and we will tell you plainly when a part is not an exact equivalent. If you are under an active service contract, check its terms first.
Can I pay by purchase order or get net terms?
Yes for established accounts. Send a credit application and trade references to sales@batautomation.com and we will set up net terms. First orders are typically card or prepay while the account is opened.
Are you set up for tax-exempt and resale purchases?
Yes. Send your Georgia resale or exemption certificate with your first order and we will flag the account so tax is not applied.
How do I know which filter cartridge fits my chamber?
Three things determine fit: cartridge length, end cap style (DOE, 222, 226, flat or fin), and micron rating. Send us the chamber make and model, or a photo of the old cartridge end cap, and we will match it.
How do I know when to change a filter?
Most shops change on differential pressure rather than on a calendar. A rise of roughly 10 to 15 PSI over the clean starting pressure usually means the element is loaded. Falling flow rate and rising haze in the bath are the other two signals.
How is freight handled on heavy items?
Small parcel is calculated at checkout. Anything over about 150 lb, oversized, or hazmat ships LTL freight and is quoted separately so you are not overcharged by a flat rate. Tanks and large chambers usually ship on a pallet with liftgate available.
What if I only have the old part and no numbers?
Photograph the nameplate, the end cap, or the part itself and email it to sales@batautomation.com with your machine or tank details. We will identify it and come back with a compatible part, a price and availability.
Tell us what the line needs.
Answer what you know and skip the rest — a person who knows plating reads every request and comes back with a price and an honest lead time, usually the same business day. Attach a drawing or a photo of the worn part and we'll work from that.
